Lasers and sensors for 1550 nm cost more than those for 905 nm, but Killinger says what contributes the most to the cost of today’s US $10,000-range automotive lidars are complex opto-mechanical scanners that spin up to dozens of lasers and sensors around many times a second. Silicon sensors don’t respond to 1550 nm, but room-temperature indium-gallium arsenide sensors do, and they also are standard communication products. Lasers emitting at 1550 nm are widely used in telecommunications and other fields, and available from companies like SemiNex in Massachusetts. Those lidars are used in open air, so using an eye-safe wavelength allows long-range measurement without worrying about eye damage to bystanders. But developers of non-automotive lidars consider 1550 nm a “sweet spot,” says lidar pioneer Dennis Killinger, distinguished university professor emeritus at the University of Southern Florida. Police lidar guns use 905-nm lasers because they don’t need long range, the lasers are cheap, and the guns can use inexpensive silicon detectors. Long wavelengths can damage the cornea, but only at intensities orders of magnitude higher than the threshold for retinal damage. Essentially no light at wavelengths beyond 1400 nm reaches the retina, so laser safety standards allow higher output at longer wavelengths. The interior of the eye-the lens, the cornea, and the watery fluid inside the eyeball-becomes less transparent at longer wavelengths, mainly because of water absorption. However, the eye is opaque to 1550-nm light (red arrows) so that wavelength cannot reach the retina, allowing the use of higher power lidar without endangering the eye. The eye’s interior is transparent to 905-nm light (blue arrow) lidar at that wavelength can reach the vulnerable retina. In fact, it’s even more hazardous because the eye cannot automatically turn away from a bright source that the retina can’t sense. But the eye transmits 905 nm to the retina, so it’s subject to the same restrictions as visible light. The retina does not respond to the 905-nm infrared light used in current car lidars, so we can’t see it. Because laser light is collimated into a narrow beam, it’s particularly hazardous: The eye focuses the parallel rays to a tiny point on the retina, which is why safety rules limit laser-pointer beams to five milliwatts. Just staring at the sun can damage the fragile retina, which is why our eyes instinctively turn away if the sun comes into our field of view. The part of the body most vulnerable to damage from a laser beam is the retina at the back of the eye. The difference in laser safety rules comes from a crucial difference in hazards posed by the two wavelengths. That extra power extends the long-wavelength lidar’s range by a factor of 10 and its resolution a factor of 50. That extra margin makes a big difference at highway speeds-at 75 miles per hour, a car travels 34 meters in a second. The key to that success is looser safety rules that let Luminar’s lasers fire pulses 40 times more powerful at 1550 nm than 905-nm lasers are allowed to fire in a conventional car. Luminar’s lidar contains one laser, one sensor, and moving optics. Last week Luminar mounted its system on a standard Mercedes-Benz and showed it outside the Laser World of Photonics trade show in Munich. startup Luminar Technologies announced a lidar able to achieve that 200-meter range by using a 1550-nm laser and showed its system at Spectrum’s offices. At least one lidar maker, however, kept tinkering. Makers of autonomous cars need to spot low-reflectivity objects at least 200 meters away to give the car enough time to identify hazards and stop, so they turned to other technologies. and other countries restrict the power in the laser pulse, limiting the lidar’s range to 30 to 40 meters, too short a distance for a car to stop safely at highway speeds. Current automotive lidars scan their surroundings by firing pulses from semiconductor diode lasers emitting at 905 nanometers in the near infrared and recording reflected light to build up a point cloud mapping the car’s surroundings.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |